本文主要研究内容
作者（2019）在《Effect of Leading-Edge Optimization on the Loss Characteristics in a Low-Pressure Turbine Linear Cascade》一文中研究指出：This paper presents a numerical study on the aerodynamics loss reduction characteristics after the leading-edge(LE) optimization in a low-pressure turbine linear cascade. The LE was optimized with a simple and practical method of "Class Function/Shape Function Transformation Technique"(CST). The simulation conditions, covering the whole working range, were independently determined by incidence, Reynolds number and Mach number. Quantitative loss analyses were carried out with a loss breakdown method based on volumetric integration of entropy production rates. To understand the reason of loss reduction, the local sources at different operating points were identified with entropy production rates. The results showed that LE optimization with the CST method played a positive role in decreasing the total losses, and the working range with lower loss was extended. The profile loss and the endwall loss were significantly reduced by the LE optimization, which were also verified to be the major causes of the total loss reduction by loss breakdown. The decrease of profile loss can be attributed to the boundary layer near the LE region and the boundary layer of downstream at off-design incidence. The reduction mostly came from the pressure side at negative incidence, while came from the suction side at the positive incidence. The endwall loss was decreased markedly about 2.5%–5% by the LE optimization at the incidence of-12°, which was 1% at the incidence of 12°. The mechanism for the endwall loss reduction at different incidences was different from each other. At negative incidence, the LE optimization diminished the corner separation vortex on the pressure side. While at positive incidence, the benefits came from three aspects, i.e., reduced suction LE separation bubbles close to the endwall, reduced passage vortex strength, and weakened shear process between passage vortex and trailing shed vortex. The loss of the downstream zone was relatively lower than that of the profile losses and the endwall losses. The effect of LE optimization on the loss of the downstream zone at different conditions was complex and it depended both on the profile boundary layer behavior at the suction trailing edge and on the passage vortex strength.
Abstract
This paper presents a numerical study on the aerodynamics loss reduction characteristics after the leading-edge(LE) optimization in a low-pressure turbine linear cascade. The LE was optimized with a simple and practical method of "Class Function/Shape Function Transformation Technique"(CST). The simulation conditions, covering the whole working range, were independently determined by incidence, Reynolds number and Mach number. Quantitative loss analyses were carried out with a loss breakdown method based on volumetric integration of entropy production rates. To understand the reason of loss reduction, the local sources at different operating points were identified with entropy production rates. The results showed that LE optimization with the CST method played a positive role in decreasing the total losses, and the working range with lower loss was extended. The profile loss and the endwall loss were significantly reduced by the LE optimization, which were also verified to be the major causes of the total loss reduction by loss breakdown. The decrease of profile loss can be attributed to the boundary layer near the LE region and the boundary layer of downstream at off-design incidence. The reduction mostly came from the pressure side at negative incidence, while came from the suction side at the positive incidence. The endwall loss was decreased markedly about 2.5%–5% by the LE optimization at the incidence of-12°, which was 1% at the incidence of 12°. The mechanism for the endwall loss reduction at different incidences was different from each other. At negative incidence, the LE optimization diminished the corner separation vortex on the pressure side. While at positive incidence, the benefits came from three aspects, i.e., reduced suction LE separation bubbles close to the endwall, reduced passage vortex strength, and weakened shear process between passage vortex and trailing shed vortex. The loss of the downstream zone was relatively lower than that of the profile losses and the endwall losses. The effect of LE optimization on the loss of the downstream zone at different conditions was complex and it depended both on the profile boundary layer behavior at the suction trailing edge and on the passage vortex strength.
论文参考文献
论文详细介绍
论文作者分别是来自Journal of Thermal Science的，发表于刊物Journal of Thermal Science2019年05期论文，是一篇关于,Journal of Thermal Science2019年05期论文的文章。本文可供学术参考使用，各位学者可以免费参考阅读下载，文章观点不代表本站观点，资料来自Journal of Thermal Science2019年05期论文网站，若本站收录的文献无意侵犯了您的著作版权，请联系我们删除。