本文主要研究内容
作者（2019）在《Type and distribution of Mid-Permian Maokou Formation karst reservoirs in southern Sichuan Basin,SW China》一文中研究指出：Based on the analysis of the responses of conventional logs such as natural gamma（GR）, density（DEN）, acoustic interval transit time（AC）, compensated neutron（CNL）, dual lateral resistivity（Rlld, Rlls）, and caliper log（CAL）, combined with drilling data,cores, thin section and productivity of 65 wells, the reservoirs in the Mid-Permian Maokou Formation of southern Sichuan Basin were divided into four types, fractured-vuggy, pore-vuggy, fractured and fractured-cavity. The main reservoirs in high productivity wells are fractured-vuggy and pore-vuggy. The reservoirs of Maokou Formation are generally thin, and can be divided into the upper reservoir segment（layer a of the second member to the third member of Maokou Formation, P2m2a-P2m3） and the lower segment（layer b of the second member of Maokou Formation, P2m2 b）. The two reservoir segments are mainly controlled by two grain beaches during the sedimentation of P2m2a-P2m3 and P2m2 b, the vertical zonation of karst, and the fractures. The upper reservoir segment is generally better than the lower one in development degree and single well productivity, and is much thicker than the lower one. It is thicker in the Yibin-Zigong-Weiyuan-Dazu area, the southwestern area of Chongqing and the southeastern area of Luzhou, while the lower segment is thicker in the Neijiang-Zigong-Luzhou area and the Dazu-Luzhou area. The areas with big reservoir thickness at tectonic slope or syncline parts are the favorable exploration areas.
Abstract
Based on the analysis of the responses of conventional logs such as natural gamma（GR）, density（DEN）, acoustic interval transit time（AC）, compensated neutron（CNL）, dual lateral resistivity（Rlld, Rlls）, and caliper log（CAL）, combined with drilling data,cores, thin section and productivity of 65 wells, the reservoirs in the Mid-Permian Maokou Formation of southern Sichuan Basin were divided into four types, fractured-vuggy, pore-vuggy, fractured and fractured-cavity. The main reservoirs in high productivity wells are fractured-vuggy and pore-vuggy. The reservoirs of Maokou Formation are generally thin, and can be divided into the upper reservoir segment（layer a of the second member to the third member of Maokou Formation, P2m2a-P2m3） and the lower segment（layer b of the second member of Maokou Formation, P2m2 b）. The two reservoir segments are mainly controlled by two grain beaches during the sedimentation of P2m2a-P2m3 and P2m2 b, the vertical zonation of karst, and the fractures. The upper reservoir segment is generally better than the lower one in development degree and single well productivity, and is much thicker than the lower one. It is thicker in the Yibin-Zigong-Weiyuan-Dazu area, the southwestern area of Chongqing and the southeastern area of Luzhou, while the lower segment is thicker in the Neijiang-Zigong-Luzhou area and the Dazu-Luzhou area. The areas with big reservoir thickness at tectonic slope or syncline parts are the favorable exploration areas.
论文参考文献
论文详细介绍
论文作者分别是来自Petroleum Exploration and Development的，发表于刊物Petroleum Exploration and Development2019年02期论文，是一篇关于,Petroleum Exploration and Development2019年02期论文的文章。本文可供学术参考使用，各位学者可以免费参考阅读下载，文章观点不代表本站观点，资料来自Petroleum Exploration and Development2019年02期论文网站，若本站收录的文献无意侵犯了您的著作版权，请联系我们删除。