本文主要研究内容
作者（2019）在《Recent Advances in Hole Making of FRP/Metal Stacks:A Review》一文中研究指出：Weight reduction is a key driving force for materials development in aerospace industry,which leads to extensive usage of lightweight structural materials such as fiber reinforced polymer(FRP),titanium alloy,aluminum alloy,etc. Hole making is indispensable to assembling these lightweight components by riveted or bolted joints.However,hole making of FRP/metal stacks is always the most challenging task due to differences of material properties between FRP and metals. A comprehensive literature review on hole making of FRP/metal stacks in the last decade is given with a focus on four main aspects including drilling operation,drilling damages and machining parameter optimization,tool performance and wear,and developments in hole making technology. Finally,in order to ensure the precise and efficient hole making of FRP/metal stacks,an idea of low frequency vibration assisted drilling(LFVAD)FRP/metal stacks based on material removal characteristics is put forward by fully exploiting the unique advantages of LFVAD technology.
Abstract
Weight reduction is a key driving force for materials development in aerospace industry,which leads to extensive usage of lightweight structural materials such as fiber reinforced polymer(FRP),titanium alloy,aluminum alloy,etc. Hole making is indispensable to assembling these lightweight components by riveted or bolted joints.However,hole making of FRP/metal stacks is always the most challenging task due to differences of material properties between FRP and metals. A comprehensive literature review on hole making of FRP/metal stacks in the last decade is given with a focus on four main aspects including drilling operation,drilling damages and machining parameter optimization,tool performance and wear,and developments in hole making technology. Finally,in order to ensure the precise and efficient hole making of FRP/metal stacks,an idea of low frequency vibration assisted drilling(LFVAD)FRP/metal stacks based on material removal characteristics is put forward by fully exploiting the unique advantages of LFVAD technology.
论文参考文献
[1].New design of a compact aero-robotic drilling end effector: An experimental analysis[J]. Shi Zhenyun,Yuan Peijiang,Wang Qishen,Chen Dongdong,Wang Tianmiao. Chinese Journal of Aeronautics.2016(04)[2].Investigation on the interface damage in drilling low-stiffness CFRP/Ti stacks[J]. Bin LUO,Kaifu ZHANG,Shunuan LIU,Hui CHENG,Runxiao WANG. Chinese Journal of Aeronautics.2019(09)[3].Multi-state autonomous drilling for lunar exploration[J]. Chen Chongbin,Quan Qiquan,Shi Xiaomeng,Deng Zongquan,Tang Dewei,Jiang Shengyuan. Chinese Journal of Aeronautics.2016(05)[4].Critical Thrust Force Forecasting for Drilling Exit Delamination of Carbon Fibre Reinforced Plastics[J]. Zhang Lin,Hu Jian,Tian Wei,Liao Wenhe,Bu Yin. Transactions of Nanjing University of Aeronautics and Astronautics.2017(04)[5].Design and analysis of the reliability of on-board computer system based on Markov-model[J]. 马秀娟,曹喜滨,赵国良. Journal of Harbin Institute of Technology.2005(01)[6].Design and experimental performance verification of a thermal property test-bed for lunar drilling exploration[J]. Zhang Tao,Zhao Zeng,Liu Shuting,Li Jinglin,Ding Xilun,Yin Shen,Wang Guoxin,Lai Xiaoming. Chinese Journal of Aeronautics.2016(05)[7].Potentials of manufacture and repair of nickel base turbine components used in aero engines and power plants by laser metal deposition and laser drilling[J]. I.Kelbassa,K.Walther,L.Trippe,W.Meiners,C.Over. 航空动力学报.2007(05)[8].NUMERICAL SIMULATION OF TRANSIENT CUTTINGS TRANSPORT WITH FOAM FLUID IN HORIZONTAL WELLBORE[J]. WANG Rui-he College of Petroleum Engineering,China University of Petroleum,Dongying 257061,China CHENG Rong-chao,WANG Hai-ge CNPC Drilling Research Institute,Beijing 100195,China BU Yu-huan College of Petroleum Engineering,China University of Petroleum,Dongying 257061,China. Journal of Hydrodynamics.2009(04)[9].Residual Stress Measurement for Ion-implanted NiTi Alloy by Using Moiré Interferometry and Hole-drilling Combined Method[J]. WANG Qianga,b,WANG Biaoa,c,*,MA De-caia,DAI Fu-longd aSchool of Astronautics,Harbin Institute of Technology,Harbin 150001,China bCollege of Physical Science and Technology,Heilongjiang University ,Harbin 150080,China cState Key Laboratory of Optoelectronic Materials and Technologies,Institute of Optoelectronic and Functional Composite Materi-als,and School of Physics Science and Engineering,Sun Yat-sen University,Guangzhou 510275,China dDepartment of Engineering Mechanics,Tsinghua University ,Beijing 100084,China. Chinese Journal of Aeronautics.2006(S1)[10].Auto-normalization algorithm for robotic precision drilling system in aircraft component assembly[J]. Tian Wei,Zhou Weixue,Zhou Wei,Liao Wenhe,Zeng Yuanfan. Chinese Journal of Aeronautics.2013(02)
论文详细介绍
论文作者分别是来自Transactions of Nanjing University of Aeronautics and Astronautics的，发表于刊物Transactions of Nanjing University of Aeronautics and Astronautics2019年03期论文，是一篇关于,Transactions of Nanjing University of Aeronautics and Astronautics2019年03期论文的文章。本文可供学术参考使用，各位学者可以免费参考阅读下载，文章观点不代表本站观点，资料来自Transactions of Nanjing University of Aeronautics and Astronautics2019年03期论文网站，若本站收录的文献无意侵犯了您的著作版权，请联系我们删除。
标签：Transactions of Nanjing University of Aeronautics and Astronautics2019年03期论文;
：Recent Advances in Hole Making of FRP/Metal Stacks:A Review论文
下载Doc文档