本文主要研究内容
作者（2019）在《Biosorption of Ni(Ⅱ) ions from aqueous solution using modified Aloe barbadensis Miller leaf powder》一文中研究指出：This study aimed to investigate the biosorption potential of Na2CO3-modified Aloe barbadensis Miller（Aloe vera） leaf（MABL） powder for removal of Ni（II） ions from a synthetic aqueous solution. Effects of various process parameters（pH, equilibrium time, and temperature） were investigated in order to optimize the biosorptive removal. The maximum biosorption capacity of MABL was observed to be 28.986 mg/g at a temperature of 303 K, a biosorbent dose of 0.6 g, a contact time of 90 min, and a pH value of 7. Different kinetic models（the pseudo-first-order,pseudo-second-order, Elovich, and intraparticle diffusion models） were evaluated. The pseudo-second-order kinetic model was found to be the best fitted model in this study, with a coefficient of determination of R2 = 0.974. Five different isotherm models（the Langmuir, Freundlich,Temkin, Dubinin-Radushkevich, and Brunauer-Emmett-Teller（BET） models） were investigated to identify the best-suited isotherm model for the present system. Based on the minimum chi-square value（x2 = 0 027） and the maximum coefficient of determination（R2 = 0.996）, the Langmuir isotherm model was found to represent the system well, indicating the possibility of monolayer biosorption. The sticking probability（S*） was found to be 0.41, suggesting a physisorption mechanism for biosorption of Ni（II） on MABL. The biosorbent was characterized using Fourier-transform infrared spectroscopy（FTIR）, scanning electron microscopy（SEM）, zeta potential, and BET surface area, in order to understand its morphological and functional characteristics.
Abstract
This study aimed to investigate the biosorption potential of Na2CO3-modified Aloe barbadensis Miller（Aloe vera） leaf（MABL） powder for removal of Ni（II） ions from a synthetic aqueous solution. Effects of various process parameters（pH, equilibrium time, and temperature） were investigated in order to optimize the biosorptive removal. The maximum biosorption capacity of MABL was observed to be 28.986 mg/g at a temperature of 303 K, a biosorbent dose of 0.6 g, a contact time of 90 min, and a pH value of 7. Different kinetic models（the pseudo-first-order,pseudo-second-order, Elovich, and intraparticle diffusion models） were evaluated. The pseudo-second-order kinetic model was found to be the best fitted model in this study, with a coefficient of determination of R2 = 0.974. Five different isotherm models（the Langmuir, Freundlich,Temkin, Dubinin-Radushkevich, and Brunauer-Emmett-Teller（BET） models） were investigated to identify the best-suited isotherm model for the present system. Based on the minimum chi-square value（x2 = 0 027） and the maximum coefficient of determination（R2 = 0.996）, the Langmuir isotherm model was found to represent the system well, indicating the possibility of monolayer biosorption. The sticking probability（S*） was found to be 0.41, suggesting a physisorption mechanism for biosorption of Ni（II） on MABL. The biosorbent was characterized using Fourier-transform infrared spectroscopy（FTIR）, scanning electron microscopy（SEM）, zeta potential, and BET surface area, in order to understand its morphological and functional characteristics.
论文参考文献
论文详细介绍
论文作者分别是来自Water Science and Engineering的，发表于刊物Water Science and Engineering2019年01期论文，是一篇关于,Water Science and Engineering2019年01期论文的文章。本文可供学术参考使用，各位学者可以免费参考阅读下载，文章观点不代表本站观点，资料来自Water Science and Engineering2019年01期论文网站，若本站收录的文献无意侵犯了您的著作版权，请联系我们删除。