
本文主要研究内容
作者(2019)在《Microstructure and Texture Evolution During the Direct Extrusion and Bending–Shear Deformation of AZ31 Magnesium Alloy》一文中研究指出:AZ31 alloys were extruded by direct extrusion and bending–shear deformation(DEBS). The microstructure characteristic and texture evolution of DEBSed AZ31 sheets were investigated by electron backscattered diffraction(EBSD). It is found that DEBS technique could effectively refine grains and weaken texture. Besides, we also investigate how twinning affects dynamic recrystallization during hot extrusion. {10–12} extension twins can offer nucleation sites and enough energy to trigger dynamic recrystallization. Moreover, the character of direct extrusion and bending–shear die can lead to the activation of non-basal slip system and further dramatically weaken the basal texture of the microstructure with many preactivated basal slip systems.
Abstract
AZ31 alloys were extruded by direct extrusion and bending–shear deformation(DEBS). The microstructure characteristic and texture evolution of DEBSed AZ31 sheets were investigated by electron backscattered diffraction(EBSD). It is found that DEBS technique could effectively refine grains and weaken texture. Besides, we also investigate how twinning affects dynamic recrystallization during hot extrusion. {10–12} extension twins can offer nucleation sites and enough energy to trigger dynamic recrystallization. Moreover, the character of direct extrusion and bending–shear die can lead to the activation of non-basal slip system and further dramatically weaken the basal texture of the microstructure with many preactivated basal slip systems.
论文参考文献
[1].Influence of extrusion ratio on microstructure and texture developments of high-temperature extruded AZ31 Mg alloy[J]. LI NaLi,HUANG GuangJie,XIN RenLong & LIU Qing* Department of Materials Science and Engineering,Chongqing University,Chongqing 400044,China.  Science China(Technological Sciences).2012(02)[2].Effects of hot extrusion and annealing treatment on microstructures,properties and texture of AZ31 Mg alloy[J]. 张慧,闫蕴琪,翁文凭,钟皓,陈琦.  Transactions of Nonferrous Metals Society of China.2006(S3)[3].Evolution of microstructure and texture in copper during repetitive extrusion-upsetting and subsequent annealing[J]. Q. Chen,D.Y. Shu,J. Lin,Y. Wu,X.S. Xia,S.H. Huang,Z.D. Zhao,O.V. Mishin,G.L. Wu.  Journal of Materials Science & Technology.2017(07)[4].Effect of Extrusion Temperature on the Microstructure and Mechanical Properties of Mg–5Al–2Ca Alloy[J]. Kun Su,Kun-kun Deng,Fang-jun Xu,Kai-bo Nie,Li Zhang,Xiao Zhang,Wei-jian Li.  Acta Metallurgica Sinica(English Letters).2015(08)[5].Microstructure and texture characteristics of ZK60 Mg alloy processed by cyclic extrusion and compression[J]. 林金保,王渠东,陈勇军,刘满平,H.J.ROVEN.  Transactions of Nonferrous Metals Society of China.2010(11)[6].Characterization of the High-Strength Mg–3Nd–0.5Zn Alloy Prepared by Thermomechanical Processing[J]. Ji■í Kub■sek,Drahomír Dvorsk■,Jozef Vesel■,Peter Min■rik,M■ria Zemkov■,Dalibor Vojtěch.  Acta Metallurgica Sinica(English Letters).2019(03)[7].Microstructure and Mechanical Properties of AZ31 Mg Alloy Fabricated by Pre-compression and Frustum Shearing Extrusion[J]. Kun Sheng,Li-Wei Lu,Yao Xiang,Min Ma,Zhong-Chang Wang.  Acta Metallurgica Sinica(English Letters).2019(02)[8].Effect of Extrusion Strain Path on Microstructure and Properties of AZ31 Magnesium Alloy Sheet[J]. Qing-Shan Yang,Bin Jiang,Zu-Jian Yu,Qing-Wei Dai,Su-Qin Luo.  Acta Metallurgica Sinica(English Letters).2015(10)[9].Microstructure and mechanical properties of Mg-14Li-1Al-0.3La alloys produced by two-pass extrusion[J]. Ruihong Li,Bin Jiang,Zhijun Chen,Fusheng Pan,Zhanyong Gao.  Journal of Rare Earths.2017(12)[10].Rare earth texture analysis of rectangular extruded Mg alloys and a comparison of different alloying adding ways[J]. Xiu-Li Hou,Yi-Xuan Zhai,Peng Zhang,Shun Guo,Zhi-Zhong Yuan,Qing-Feng Guan.  Rare Metals.2016(11)
论文详细介绍
论文作者分别是来自Acta Metallurgica Sinica(English Letters)的,发表于刊物Acta Metallurgica Sinica(English Letters)2019年06期论文,是一篇关于,Acta Metallurgica Sinica(English Letters)2019年06期论文的文章。本文可供学术参考使用,各位学者可以免费参考阅读下载,文章观点不代表本站观点,资料来自Acta Metallurgica Sinica(English Letters)2019年06期论文网站,若本站收录的文献无意侵犯了您的著作版权,请联系我们删除。
标签:Acta Metallurgica Sinica(English Letters)2019年06期论文;
:Microstructure and Texture Evolution During the Direct Extrusion and Bending–Shear Deformation of AZ31 Magnesium Alloy论文
下载Doc文档